Answers are grounded in this paper and cite their sources.
Chemical oxo-precipitation (COP) is a modified precipitation process in which hydrogen peroxide is used to transform boric acid to perborate anions, which are precipitated with calcium salt under ambient conditions. To minimize the production of sludge, chemical oxo-precipitation was performed in a fluidized-bed reactor to reclaim boron as unseeded calcium perborate pellets. Several major experimental parameters, including effluent pH, calcium dosage, and surface loading that affected the degree of supersaturation and the efficiency of boron removal, were tested. A crystallization ratio of around 60% was attained under the following conditions: initial boron concentration = 1000 ppm, molar ratios of [Ca]/[B] = 0.6 and [H 2 O 2 ]/[B] = 2, effluent pH = 10.6, bed height = 80 cm, and hydraulic retention time = 18 min. On the basis of the characterization of XRD, SEM, and Raman spectroscopy, the granules recovered were amorphous calcium perborates Ca(B(OH) 3 OOH) 2 and CaB(OH) 3 OOB(OH) 3 .
No takes yet. Share an insight, caveat, or question.
Vu et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: