Answers are grounded in this paper and cite their sources.
With the rapid development of electric vehicles, power electronics, and medical devices, high-energy-density capacitors have attracted considerable research and engineering attention. In this investigation, we added surface-coated BNT-NN ((Bi 0.5 Na 0.5 )TiO 3 –NaNbO 3 ) nanoparticles into the poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) matrix to fabricate BNT-NN/PVDF-HFP nanocomposites. We found that the composite with ultralow contents of BNT-NN (0.5 wt %) exhibited an ultrahigh energy density of 36.94 J cm –3 at 800 mV m –1, which is 17.5% higher than that of the pristine PVDF-HFP film. However, as the content of BNT-NN nanoparticles increased to 1%, the energy density decreased by 10.9% to 32.9 J cm –3 at 750 mV m –1 . Compared with other PVDF-based nanocomposite films reported previously, this work shows a much higher energy density. This may be attributed to the largely increasing dielectric constant at the interface between the nanoparticles and their surrounding substrate, especially for the nanocomposite with a low volume content. The calculated dielectric constant from the theoretical model considering interface parameters fits well with the experimental data, indicating that the composites possess K max at ultralow nanoparticle contents. Therefore, the ultralow nanoparticle-added nanocomposites show great promise for ultrahigh-energy-density capacitor applications.
No takes yet. Share an insight, caveat, or question.
Xie et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: