Answers are grounded in this paper and cite their sources.
Pump as Turbine (PAT) technology presents a cost-effective alternative to conventional turbines, especially for small-scale green micro hydropower, due to its affordability, availability, and low maintenance requirements. PATs typically exhibit lower efficiency, as they are not originally designed for reverse (turbine) operation. This study focuses on improving the performance of a low specific speed (19.9 rpm) end suction centrifugal PAT through blade profile modification (BPM) and a set of combined modifications. These combined modifications include impeller blade rounding (IBR), impeller shroud rounding (ISR), back cavity filling (BCF), and the addition of splitter blades. Computational Fluid Dynamics (CFD) analysis is employed to evaluate the internal flow behavior and hydraulic performance. Numerical results are validated against experimental data to ensure accuracy. BPM alone reduces secondary flow losses, resulting in a 3.4% increase in shaft torque and a 4.8% improvement in efficiency. The highest efficiency gain, 6.7%, is achieved by combining BPM with IBR, ISR, BCF, and splitter blades. To ensure economic feasibility, the study recommends a balanced configuration involving BPM, IBR, ISR, and BCF, which delivers a 6% efficiency improvement. This combination offers a practical and cost-effective approach for enhancing PAT performance in micro hydropower and energy recovery systems.
No takes yet. Share an insight, caveat, or question.
Gaji et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: