Answers are grounded in this paper and cite their sources.
A simple approach to modeling the plasma layer similar to that appearing in the vicinity of a hypersonic vehicle is demonstrated in a laboratory experiment. This approach is based on the use of a hypersonic jet from a cathodic arc plasma. Another critical element of this laboratory experiment is a blunt body made from a fairly thin foil of refractory material. In experiments, this blunt body is heated by the plasma jet to a temperature sufficiently high to ensure evaporation of surface deposits produced by the metallic plasma jet. This process mimics reflection of gas flow from the hypersonic vehicle in a real flight. Two-dimensional distributions of the hypersonic plasma flow around the blunt body were measured using electrostatic Langmuir probes. Measured plasma density was typically , which is close to the values measured for real hypersonic flight. The demonstrated laboratory experiment can be used to validate numerical codes for simulating hypersonic flight and to conduct ground-based tests for efficiency validation of various radio communication blackout mitigation techniques.
No takes yet. Share an insight, caveat, or question.
Shashurin et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: