This is the authors' abstract. We don't add key points for this paper.
Pb(Zn 1/3 Nb 2/3 )O 3 ‐based ceramics have been prepared by two different processing methods: conventional (PZN‐C) and reaction‐sintering (PZN‐RS). The conventionally prepared PZN‐based ceramics densified at lower temperatures (950°C) than the reaction‐sintered samples (1100°C), but the perovskite/pyrochlore ratio was always higher in PZN‐RS. The presence of a substantial amount of pyrochlore phase in PZN‐C ceramics caused a decrease in the electrical properties. The maximum dielectric constant values in PZN‐C ceramics were 10%–15% lower than those of PZN‐RS, despite a similar average grain size, 7 ± 0.2 μm. The temperature of the maximum of the dielectric constant ( T max ) was lower than that expected from the mixing rule because of the possible formation of Ba–Nb clusters. The higher chemical homogeneity in PZN‐RS ceramics is the main reason for the higher dielectric constant, T max and electromechanical response, as well as for the lower difference between T max and the depolarization temperature ( T d ) and the lower diffusiveness parameter (δ).
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Villegas et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: