Answers are grounded in this paper and cite their sources.
The impact of different surface modifiers, i.e., tri-biochemical silica coating (TBC), low-level laser therapy (LLLT) using malachite green (MG) and a nanosecond (ns) laser on the surface roughness (Ra) and repair bond strength of a nanocomposite ceramic (NCC) to a composite was elucidated upon. NCC discs were manufactured by utilising prefabricated blocks and underwent disinfection. These discs were subsequently categorised into four groups at random, applying various surface modifiers (n=16) - Group 1: HFA ⁺ S; Group 2: TBC ⁺ S; Group 3: LLLT (MG) ⁺ S and Group 4: ns laser ⁺ S. A topographic evaluation following surface modification was performed using Scanning Electron Microscopy (SEM). An Ra analysis was performed on five specimens using a surface profilometer. A composite was applied to repair the ceramic surface, where the repair bond strength and failure mode assessment was performed utilising a universal testing machine and stereomicroscope, respectively. The data were analysed using a one-way analysis of variance (ANOVA), and Tukey's post-hoc test, with p˂0.05 deemed significant. The highest Ra values (1558.38 ± 0.022 μm) and repair bond strength (18.22 ± 0.19 MPa) of the NCC were observed in Group 2 (TBC) samples. However, the Group 3 LLLT-MG pre-treated samples exhibited the lowest roughness (1009.24 ± 0.021 μm) and bond strength (13.18 ± 0.32 MPa) values. A tribochemical silica coating and nanosecond laser can be used as an alternative conditioning regime for nanocomposite ceramics as they positively influence the repair bond strength and Ra.
No takes yet. Share an insight, caveat, or question.
Abdulaziz Samran (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: