Answers are grounded in this paper and cite their sources.
The effect of different surface modifiers, i.e., a tri-biochemical silica coating (TBC), an ultrashort pulsed laser (UPL), nano-hydroxyapatite (HA) on the surface roughness (Ra), and shear bond strength (SBS) of hybrid ceramics (HBCs) bonded to the resin luting cement was elucidated upon. Eighty-four squared HBC discs were prepared and randomly allocated into four groups based on the different surface pre-treatment: Group 1 (SB), Group 2 (TBC), Group 3 (UPL) and Group 4 (Nano-HA). A surface topography analysis was performed on one pair of samples from each group using scanning electron microscopy (SEM) followed by an EDX analysis. Forty discs underwent an Ra analysis using a profilometer. Luting cement was bonded to the HBC discs followed by artificial ageing on ten samples from each group. The SBS was measured using a universal testing machine and the failure was examined under a stereomicroscope. Data normality was assessed using the Kolmogorov-Smirnov test, and the Ra and SBS data were analysed using a one-way analysis of variance and Tukey's post-hoc test. (p ≤0.05). The maximum Ra (1075.21 ± 0.5 μm) and SBS (9.6 ± 0.1 MPa) scores were obtained in the Group 4 (HAp coating) specimens. Nevertheless, the Group 3 (UPL) treated discs demonstrated the lowest outcomes of the Ra (999.42 ± 1.1 μm) and bond strength scores (8.9 ± 0.2 MPa). The nano-hydroxyapatite and tri-biochemical silica coating can be used as an alternative to sandblasting to condition hybrid ceramics.
No takes yet. Share an insight, caveat, or question.
Mohammed Hussain Dafer Al Wadei (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: