Answers are grounded in this paper and cite their sources.
This article proposes a low-area multiband terahertz (THz) detector structure for spectroscopic imaging, which consists of several narrow-band THz detectors with different detection frequencies. By combining the output of the narrow-band detectors, broadband detection is realized. The detection frequency can be expanded by adding more narrow-band detectors with different detection bands. To reduce the whole area of the detector, a loop antenna is used in each narrow-band detector to realize a nestable architecture, where the high-frequency antennas are successively placed in the low-frequency antennas with the same center position. The area is determined only by the narrow-band detector with the lowest detection frequency. Each of the narrow-band detectors adopts a conventional self-mixing detection structure, including an FET-based power detection circuit, an on-chip loop antenna, and a matching network. Two spiral structures are proposed as the matching network to improve the performance of each narrow-band detector. Using the multiband detector structure, a detector with eight frequency bands has been implemented in the 65-nm CMOS process, which achieves effective detection in the 75–1100 GHz range with an area of only 244 × 244μm2. A peak voltage responsivity (Rv) of 1.4 kV/W and a minimum noise equivalent power of 17 pW/Hz1/2are achieved. A set of spectrum analysis experiments and imaging experiments verify the practicability of the multiband detector structure.
No takes yet. Share an insight, caveat, or question.
Qi et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: