Answers are grounded in this paper and cite their sources.
To enhance the hydrophilicity, mechanical properties, and biological performance of PCL/30S48P4 composite scaffolds, in this study, three enhanced composite scaffolds (PCL-COOH/30S48P4, PCL/30S48P4/10CS, and PCL/30S48P4@20CS) were successfully fabricated using DIW technology based on distinct strategies including PCL carboxylation, chitosan (CS) doping, and dual-printhead alternating printing, and their surface characteristics, physico-mechanical properties, bioactivity, and in vitro biocompatibility were systematically evaluated. The results demonstrated that all three modification strategies enhanced the PCL/30S48P4 composite scaffolds to varying degrees. Due to the introduction of hydrophilic groups, the three enhanced composite scaffolds exhibited lower water contact angles. Specifically, the contact angles of PCL/30S48P4/10CS and PCL/30S48P4@20CS decreased to 72.28 ± 2.79° and 69.56 ± 3.38°, respectively, falling within the optimal range for cell adhesion (35° ∼ 80°). Meanwhile, the compressive strengths of the three enhanced scaffolds reached 6.12 ± 0.25 MPa, 8.06 ± 0.33 MPa, and 7.13 ± 0.19 MPa, representing increases of 11.48%, 46.81%, and 29.33%, respectively, compared with the pristine scaffold. In vitro SBF immersion tests revealed continuous deposition of HCA on the scaffold surfaces, indicating favorable mineralization activity. Furthermore, in vitro biocompatibility evaluation showed that PCL/30S48P4/10CS exhibited superior cell viability and ALP activity relative to the other groups. In summary, among these scaffolds, PCL/30S48P4/10CS exhibits the optimal comprehensive performance and provides preliminary experimental evidence for further investigation of the scaffold as a candidate material for bone repair.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: