Design of a 3-MW 140-GHz gyrotron with a coaxial cavity

A design for a 3-MW 140-GHz gyrotron based on the use of a coaxial cavity is given. The cavity mode is TE/sub 21,13/, chosen so that the ohmic heating on both the inner and outer conductors would be low enough for CW operation. The mode selection process, nonlinear, multimode and time-dependent modeling of the beam wave interaction, and gun design are discussed in detail. An inverted magnetron injection gun (MIG) is used to accommodate the inner conductor. The radiation is coupled out via a quasi-optical mode converter, consisting of an irregular cylindrical waveguide section followed by a step-cut launching aperture and a single near-parabolic mirror. The design of these components is also described.