Answers are grounded in this paper and cite their sources.
The green asphalt cement binder is composed of asphalt and additives which are obtained from waste materials. Flexural-creep stiffness of asphalt binder is an indicator of its performance at low temperatures. In the present work, the influence of Nano and Micro additives (fumed silica, silica fumes, hydrated lime, and coal fly ash) on flexural creep stiffness of the green binder was evaluated. Conventional asphalt cement binder with penetration grades (60-70) and (40-50) were investigated. A significant control of such modification on creep stiffness was detected from the experimental program. It was detected that the creep stiffness of (60-70) binder is lower than that of (40-50) binder by 21 %. The creep stiffness of (60-70), and (40-50) green asphalt binders treated with fumed silica is higher than that of control binder by (12.5 and 25) % at failure respectively. While the creep stiffness of (60-70), and (40-50) green asphalt binders treated with silica fumes is higher than that of control binder by (17.8 and 35) % at failure respectively. For (60-70) and (40-50) binders, the creep stiffness increased by (25, and 6.2) % and (32.5, and 5) % after modification with hydrated lime and coal fly ash respectively. It was concluded that modification of asphalt binder with Micro or Nano additives exhibited a reasonable control on the creep stiffness of the binder of the sol and gel types. Additives are recommended to control the cracking of the binder at low temperatures.
No takes yet. Share an insight, caveat, or question.
Saad Issa Sarsam (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: