X-Band Miniature Filters Using Lithium Niobate Acoustic Resonators and Bandwidth Widening Technique

This work presents a class of micro-electromechanical system (MEMS)-driven radio frequency filters in the X-band. The X-band center frequencies are achieved by resorting to the third-order antisymmetric Lamb wave mode (A3) in a 650-nm-thick Z-cut lithium niobate thin film. A novel bandwidth (BW) widening technique based on using the self-inductance of the top interdigital transducers and bus lines is proposed to overcome the limitations set by the electromechanical coupling (k2t) and satisfy the demands in miniaturization and wide BW. Four different designs of the filters are designed and fabricated to show the trade-off among BW, insertions loss (IL), out-of-band rejections, and footprint. Due to the spurious-free and highQ performance of the A3 lithium niobate resonators, the fabricated A3 lithium niobate filters have demonstrated small in-band ripples and sharp roll-offs. One of these fabricated has demonstrated a 3-dB BW of 190 MHz, an IL of 1.5 dB, and a compact footprint of 0.56 mm2. Another design is fabricated to demonstrate a 3-dB BW of 170 MHz, an IL of 2.5 dB, an outof-band rejection of 28 dB, and a compact footprint of 1 mm2.