Answers are grounded in this paper and cite their sources.
Photoinduced charge transfer is a crucial process in the operation of organic solar cells. In this work we used two spectroscopic techniques, namely, time-resolved photoluminescence and light-induced electron spin resonance, which directly detect this phenomenon in blends composed of [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and two air-stable polyazomethines with different chemical structures, one with thiophene ring and cardo moieties (25Th-cardo) and one with three thiophene rings (2252Th-DMB). For both polymers we observed a photoluminescence with a maximum around 2 eV. In a mixture with PCBM, the photoluminescence of both polymers was quenched. At the same time, the photoluminescence of PCBM was enhanced in a mixture with 25Th-cardo, whereas it was similar to the photoluminescence of pure PCBM in the mixture with 2252Th-DMB. Moreover, for 2252Th-DMB:PCBM, two overlapping lines of electron spin resonance were detected under illumination, one originating from the positive polaron and another from the negative polaron. No trace of the analogue lines was seen for illuminated 25Th-cardo:PCBM. These differences were reflected also in an external quantum efficiency which increased from 0.3% for 25Th-cardo to 3% for 2252Th-DMB mixtures with PBCM. Experimental results are supported by the theoretical calculations of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels using the density functional theory method, and the presented observations are discussed within HOMO–LUMO models of the studied materials in the context of charge-transfer processes. Finally, the results addressed above are compared with those obtained for the P3HT:PCBM mixture typically used as donor–acceptor active layer in bulk heterojunction polymer solar cells.
No takes yet. Share an insight, caveat, or question.
Ciechanowicz et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: