Answers are grounded in this paper and cite their sources.
Boron carbide nanostructures were grown on Si wafers through introduction of a mixture of B 2 O 3 dissolved in methanol using hot filament chemical vapour deposition. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), Raman spectroscopy and the four-point probe technique were applied to characterise the properties of the boron carbide nanostructures. The XRD results showed that two kinds of boron carbide chemical compounds (B 4 C and B 2 C 2 ) were deposited and the effect of boron concentration was significant. The FESEM images showed that the boron carbide nanostructures are made of crystal clusters with a cauliflower-like shape, in which the grain boundaries appear more clearly with increasing boron concentration. In addition, the AFM results showed that the surface roughness of the boron carbide films decreased with increasing boron concentration due to grain boundary diffusivity. The Raman spectrum results confirmed the presence of a B 4 C network and G and D bands. The results of the four-point probe method indicated that samples with higher boron incorporation showed the lowest sheet resistance (0.06 ω sq −1 ), which may be because of the decrease in inter-grain boundaries caused by the larger cluster size. This study suggests that higher boron incorporation in boron carbide nanostructures results in larger crystal clusters, higher thickness and lower film resistivity.
No takes yet. Share an insight, caveat, or question.
Jafari et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: