Answers are grounded in this paper and cite their sources.
We report high performance InGaN multiple-quantum well (MQW) light-emitting diodes (LEDs) grown on Si (1 1 1) substrates using metalorganic chemical vapour deposition (MOCVD). A high-temperature thin AlN layer and AlN/GaN multilayers have been used for the growth of a high-quality GaN-based LED structure on Si substrates. Reduction of the high-temperature AlN layer thickness promotes the formation of a tunnel junction at the AlN/Si interface which reduces the LED operating voltage. Optical output power of the LED on Si saturates at a higher injected current density due to higher thermal conductivity of Si than that of a sapphire substrate. At a high injection current, output power of the LED on Si is higher than that of the LED on sapphire. Cross-sectional transmission electron microscopy (TEM) indicates that the active layer of these LEDs consists of a dislocation-free pyramid-shaped (quantum-dot-like) structure. Additionally, the crack-free thin-film LED epilayer region was transferred onto a copper carrier using metal-to-metal bonding and the selective lift-off technique. A LED with high output power, low operating voltage and low series resistance was realized by this technique. Furthermore, optimization of LED on Si by insertion of an Al0.06Ga0.94N/GaN strained-layer superlattice underlayer into the structure exhibits improved internal quantum efficiency (ηiqe) in the MQW, higher optical emission intensity with higher saturation current, lower operation voltage of 3.2 V at 20 mA and a series resistance of 16 Ω, as well as narrower electroluminescence spectra.
No takes yet. Share an insight, caveat, or question.
Takashi Egawa (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: