Answers are grounded in this paper and cite their sources.
This paper provides a comparative study of several stator windings’ arrangements, to design a multi-three phase Surface-Mounted Permanent Magnet electric machine as part of a powerline for aircraft electric propulsion that includes several three-phase inverters, and a mechanical speed reducer. The objective of the study is to find the multi three-phase winding that gives the best compromise between all the aircraft requirements: maximum fault tolerance capability, and minimum powerline mass and losses. Following design considerations, a Half Bridge (HB) inverter, with a Y-connected distributed winding, was chosen for the electric motor. The multi three-phase winding modularity allows to operate in degraded mode, by turning off one or several inverters. However, the remaining available power depends on the winding arrangement, as well as the number of possible faults before a complete powerline failure. A qualitative comparison is therefore performed between the windings to assess their fault tolerance. Moreover, Design Optimization (DO) studies are carried out to compare the different modularity solutions in terms of power density and efficiency. The DO is performed on a system level, including the electric motor, the speed reducer and eventual passive filters that are necessary in faulty cases. Finally, some optimal motor designs are chosen and validated through Finite Element Analysis (FEA).
No takes yet. Share an insight, caveat, or question.
Salloukh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: