Low-Energy Ion Scattering (LEIS) was employed to study the surface of unsupported and silica-supported Cu/ZnO catalysts. It was shown that, by applying isotopic enrichment ( 63 Cu and 68 Zn), the copper and zinc signals can be separated. LEIS measurements showed a considerable amount of lead on the surface of the 63 Cu/ 68 ZnO catalyst. It was concluded that lead originated from the 68 ZnO raw material and segregated during catalyst reduction to the surface. In contrast, no impurities were detected on the surface of the 63 Cu/ 68 ZnO/SiO 2 catalyst. This seemingly contradictory observation was attributed to the higher degree of copper and zinc dispersion in the latter catalyst or interaction of lead with the support. It was shown previously, that catalytic activity of Cu/ZnO/SiO 2 catalysts in methanol synthesis and ester hydrogenolysis is proportional with the reduction temperature applied (600−750 K). A depth profile of copper and zinc obtained for the high-temperature reduced silica-supported catalyst revealed that the surface was enriched in zinc, whereas copper was more abundant in layers beneath the surface. In the low-temperature reduced catalyst, the zinc enrichment was less prominent. These results suggest that the reduction at high-temperature results in segregation of zinc oxide to the surface.
No takes yet. Share an insight, caveat, or question.
Viitanen et al. (1999) studied this question.
Synapse has enriched one closely related paper. Consider it for comparative context: