Answers are grounded in this paper and cite their sources.
Experimental study demonstrates water matrix complexity impairs photocatalytic degradation of pharmaceuticals, highlighting the need for additional treatment steps to eliminate residual toxicity.
The degradation of a pharmaceutical mixture (gemfibrozil, hydrochlorothiazide and naproxen) by TiO 2 /UV-A in different aqueous matrices was evaluated. The matrix components affected the operational conditions, rate constants, and removal efficiency of the pharmaceuticals, as well as toxicity. For sewage treatment plant effluent, a TiO 2 concentration three-fold higher (450 mg L -1 ) and an irradiation time 1.5-3 times longer were required to reach the same efficiency of degradation as the pharmaceuticals in deionized water and surface water matrices. An improvement in the rate constants and the removal efficiency of the pharmaceuticals was achieved by adding 6 mg L -1 of H 2 O 2 and 150 mg L -1 of TiO 2 in deionized water and surface water, but not in the sewage treatment plant effluent, due to the coupling of 450 mg L -1 of TiO 2 and 50-200 mg L -1 of H 2 O 2 . Overall, TiO 2 /UV-A efficiently degraded all compounds, but an additional step is needed for the removal of residual toxicity.
No takes yet. Share an insight, caveat, or question.
Paniagua et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: