This is the authors' abstract. We don't add key points for this paper.
The shear characteristics of cemented soil-soil interface with varying roughness, resulting from different construction techniques, significantly affect the stability and safety of related engineering projects. However, roughness is often defined through geometric parameters in laboratory tests which can be hardly actually measured in practice. Therefore, it is necessary to propose a quantitative measurement method of roughness that can be applied in the field for further study. In this paper, the quantitatively practical model effectively links field interface geometry conditions with real roughness based on rock quality designation (RQD) according to core drilling method. Large-scale interface shear tests, direct shear tests and numerical simulations were conducted considering different factors. The results show that the cemented soil-soil interface failure mode exhibits plastic damage. The increase in normal stress and cemented soil strength contributes to the increase of interface shear strength. The roughness can be constituted by 3D printer, related to practical quality parameter of RQD. Quantitatively, the shear strength of rough interface is about 1.1-2.0 times higher than that of smooth interface under the same conditions, and the direct shear test results are approximately 2.615 times larger than those from large-scale interface shear tests. Compared to smooth interface, rough interface ensures more cementation and allows shear strain to spread over a larger area so as to increase the interface shear strength. The test results provide valuable help for evaluating the interface roughness in the field and understanding the interface shear characteristics. • A practical roughness evaluation model based on RQD is developed for field application using core drilling method data. • The empirical relationship between roughness value and interface shear strength is established. • Sensitivity analysis and validated numerical simulations confirm roughness, curing time, and normal stress as key influencing factors.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: