Answers are grounded in this paper and cite their sources.
Vanadium titanomagnetite (VTM) resources in the Panzhihua region of China are notably abundant, characterised by relatively low iron and vanadium grades and alongside elevated concentrations of TiO2 and gangue constituents. Consequently, the upgrading process of VTM is commonly employed to enhance the recovery of valuable metals and reduce slag volume during blast furnace operations. Nevertheless, the effect of VTM upgrading on its sintering basic characteristics remains inadequately understood. The findings of this investigation indicate that the application of the VTM upgrading process weakens the formation ability and fluidity of the liquid phase, as well as the wettability of calcium ferrite flux (CF-flux) on VTM. This, in turn, inhibits the formation of silico-ferrite of calcium and aluminium (SFCA) and adversely affects the consolidation characteristics of sinter. It is further confirmed that the strength of VTM sinter briquettes relatively decreases by 5.5% and 6.3% when burnt lime and CF-flux are individually used as the calcium fluxes at 2.0 basicity following the upgrading process. Increasing (CaO + SiO2) content is proposed as an effective strategy to enhance the upgraded VTM sintering while maintaining stable sinter basicity.
No takes yet. Share an insight, caveat, or question.
Hu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: