Answers are grounded in this paper and cite their sources.
Mo(Si,Al) 2 ceramics offer improved oxidation resistance over MoSi 2 , enhancing performance in resistive heating elements. However, formation of the anisotropic secondary phase Mo 5 (Si,Al) 3 during processing also promotes crack formation. While coefficients of thermal expansion (CTE) data exist for the Mo(Si,Al) 2 matrix phase and Al-free Mo 5 Si 3 , it is unclear how Al-incorporation affects the thermal expansion behaviour of Mo 5 (Si,Al) 3 . In this work, high-temperature neutron diffraction was used to measure phase-specific anisotropic thermal expansion in Mo(Si,Al)₂ ceramics, with and without Al-addition. The Mo₅(Si,Al)₃ phase was confirmed to be anisotropic, independent of Al-content. This study provides the first CTE-data for Mo₅(Si,Al)₃ embedded in the matrix phase and with Al-addition, offering valuable insight for designing reliable heating elements for high-temperature industrial applications. Typical microstructure of Mo(Si,Al) 2 ceramics and the ratio of temperature dependent lattice parameters, c over a , illustrating the anisotropy of the Mo 5 (Si,Al) 3 secondary phase. • Neutron diffraction used to study Mo(Si,Al) 2 ceramics up to 1100 °C. • First coefficients of thermal expansion reported for Mo 5 (Si,Al) 3 embedded in a matrix phase. • Secondary Mo 5 (Si,Al) 3 phase shows strong anisotropy, unaffected by Al-substitution. • Thermal anisotropy of Mo 5 (Si,Al) 3 lower than literature due to matrix constraint effects.
No takes yet. Share an insight, caveat, or question.
Bakken et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: