Answers are grounded in this paper and cite their sources.
The thermal behavior of chemically delithiated Li 0.35 [Ni 1/3 Co 1/3 Mn 1/3 ]O 2 and the AlF 3 -coated material was studied in the temperature range from room temperature to 600 °C. Thermogravimetric analysis results showed that the uncoated and the AlF 3 -coated Li 0.35 [Ni 1/3 Co 1/3 Mn 1/3 ]O 2 powders experienced distinct weight loss with increasing temperature, of which the weight loss was ascribed to oxygen release from the active materials. The released oxygen amount was less for the AlF 3 -coated Li 0.35 [Ni 1/3 Co 1/3 Mn 1/3 ]O 2 than the uncoated material, probably due to the blocking of the oxygen evolution by the AlF 3 coating. The weight loss was associated with the irreversible phase transformation from a rhombohedral layer ( R 3 m̅ ) structure to a cubic spinel ( Fd3m ) structure, as confirmed by in situ high-temperature X-ray diffraction. The reduced oxygen release brought about by the AlF 3 coating delayed the phase transformation to the cubic spinel structure. This entailed shifts of the main exothermic reactions to higher temperatures for the active material in the presence of an electrolyte. The AlF 3 coating remained on the surface of the active material to 300 °C. Thereafter, the layer changed to Li−Al−O with increasing temperature, as observed by the time-of-flight secondary ion mass spectroscopy. The improved thermal properties of the chemically delithiated AlF 3 -coated Li 0.35 [Ni 1/3 Co 1/3 Mn 1/3 ]O 2 were ascribed to the suppression of oxygen release from the active material, and this, in turn, retarded the formation of the cubic spinel phase.
No takes yet. Share an insight, caveat, or question.
Myung et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: