Answers are grounded in this paper and cite their sources.
A high temperature X-ray diffraction technique has been applied to determine the structure of the molten FeO–Fe2O3–SiO2 system from 1250 to 1350°C. The SiO2 content and the oxygen partial pressures were in the range of 22.5 to 35 wt% and 2.0×10−7 to 2.0×10−3 Pa, respectively. From an analysis of the scattering intensity, the radial distribution function was calculated from which interatomic distances and coordination numbers were estimated. The following characteristic features emerged from these results. A constant coordination number of about four at a distance of about 0.162×10−9 m was found for Si–O pairs over the composition and temperature range investigated. This observation supports the concept that the fundamental local ordering unit is the SiO4 tetrahedra in the molten FeO–Fe2O3–SiO2 system. The Si–Si distance, which corresponds to the inter SiO4 distance, gradually decreases as the SiO2 content increases and finally approaches a nearly constant value at a composition beyond 30 wt% SiO2. This constant value is comparable with the value of the Si–O–Si distance in branched chain and polyring structures and suggests that some of the SiO4 tetrahedra polymerize to form larger silicate anions. The Fe–O distance gradually decreases as the SiO2 content increases from 27.5 wt% SiO2 and becomes nearly constant beyond 30 wt% SiO2. This variation of the Fe–O correlation corresponds to a change in the position of the Fe from an octahedral site to a tetrahedral site of oxygen arrangement. The reported viscosity maximum near the fayalite composition is discussed on the basis of a combination of the silicate anion polymeri-zation effect and the cation effect which are related to the present structural findings.
No takes yet. Share an insight, caveat, or question.
Waseda et al. (1980) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: