Answers are grounded in this paper and cite their sources.
A new low temperature processing method for preparation of SrBi2Ta2O9 thin films is proposed. These thin films were prepared on Pt/Ta/ SiO2/Si substrates by a sol-gel method, and their structural and electrical properties were investigated. Films were annealed before and after the top Pt electrode deposition. The 1st annealing was performed in a 760 Torr oxygen atmosphere at 600° C for 30 min, and the 2nd annealing was performed in a 5 Torr oxygen atmosphere at 600° C for 30 min. The films were well crystallized and fine grained after the 2nd annealing. The electrical properties of the 200-nm-thick film obtained using this new processing method, i.e., the remanent polarization (P r), coercive field (E c), and leakage current density (I L), were as follows: P r=8.5 µ C/cm2, E c=30 kV/cm, and I L=1×10-7 A/cm2 (at 150 kV/cm). This new processing method is very attractive for highly integrated ferroelectric nonvolatile memory applications.
No takes yet. Share an insight, caveat, or question.
Ito et al. (1996) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: