Answers are grounded in this paper and cite their sources.
A mathematical model was developed to simulate the effect of axial mixing and recycle on competition between filamentous and floc-forming microbial populations based on the Monod equation and the plug flow with recycle flow model, and a matched artificial recycle ratio was defined to include the effects of both axial mixing and recycle flow on the residence time distribution. The model predicted that low recycle ratios (R< 1.0), implying low axial dispersion, favored floc-formers; increasing R (to R> 10) eventually eliminated the competitive advantage of the floc-formers over the filaments. The feed concentration was also an important factor in microbial selection with a predominantly filamentous biomass predicted when R> 0.1 and Si< 100 mg/L as COD. An operating diagram prepared based on the model output showed that a high recycle ratio and/or low feed concentration favored filamentous domination, while floc-formers dominated at a low recycle ratio and/or high feed concentration. Strategies to control or prevent bulking include the compartmentalization of or the reduction of mixing power within the aeration tank to reduce axial mixing, as well as reducing the actual recycle rate. Experimental data and field observations reported by other researchers were consistent with the model results.
No takes yet. Share an insight, caveat, or question.
Magbanua et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: