Answers are grounded in this paper and cite their sources.
Epoxy resin exhibits exceptional stiffness and adhesion, making it essential as a matrix for protective coatings and composites. However, their inherent brittleness, low fracture toughness, and susceptibility to thermal/UV degradation limit their performance in demanding applications. To overcome these challenges, nanofillers are incorporated into epoxy matrices to enhance their properties. In this study, 2D/2D heterostructure Ti 3 C 2 T x MXene/MoS 2 hybrid nanofillers were added into epoxy coatings to synergistically enhance the thermomechanical, abrasion, and UV-shielding performance of epoxy. The hybrid nanofiller (MX/MS) was synthesized hydrothermally and characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and field emission scanning electron microscopy (FESEM) analyses. The incorporation of 0.5 wt% of hybrid nanofiller into epoxy coatings significantly improved thermal stability, increasing char residue from 14% (neat epoxy) to 27%. Mechanical properties enhancements included an increase in tensile strength by 3.5 times, 112% higher hardness (146.6 to 311.4 MPa), and 45% greater storage modulus (1354 to 1958 MPa). Concurrently, the coating exhibited exceptional durability, reducing abrasion wear rate by 58% (6.5 to 2.7 μg/cycle) and UV color change (ΔE) by 62% (11.86 to 4.53) after 200 hours of accelerated weathering. This work pioneers MXene/MoS 2 hybrids as multifunctional reinforcements that uniquely converge thermal, mechanical, and protective enhancements in epoxy coatings.
No takes yet. Share an insight, caveat, or question.
Soroush et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: