Answers are grounded in this paper and cite their sources.
In this paper, a novel technique for constructing a design-oriented multi-layer coplanar waveguide (CPW) transmission line model is proposed. The technique uses a novel method to determine the conductive losses of an arbitrary CPW line, based on the losses of a limited set of measured reference lines, with a constant ground-to-ground spacing and a closed-form formula derived for standard CPW lines, to predict the geometric dependancy of the conductive losses. The characteristic impedance and effective dielectric constant are easily and accurately predicted using a quasi-TEM program. The final model contains a look-up table for Zc and ɛeff and closed-form expressions for the losses. It can be easily implemented in commercial design software, and provides the designer with an accurate multi-layer CPW transmission line model which is fully scalable in strip-width, slot and length. The method has been verified by 3-D simulations and measurements of CPW lines on thin-film multi-layer MCM-D with very good accuracy. It is shown that the performance of the loss-scaling method is superior to the results obtained by 3-D simulations or by implementing conventional CAD formulas.
No takes yet. Share an insight, caveat, or question.
Carchon et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: