Answers are grounded in this paper and cite their sources.
It was shown in the previous work that the hybrid sintering process using microwave heating and hot-pressing offers advantages over the conventional technologies in the fabrication of piezoelectric ceramics. On the basis of these, the authors predicted that the hybrid process might be applied to the fabrication of the ceramic composite from small single crystal grains and powder of relaxor-type material. In this study, the fabrication of a ceramic composite consisting of 0.79PNN–0.21PT (PNN–PT) single crystals in a 0.5PNN–0.15PZ–0.35PT (PNN–PZT) ceramic powder using the hybrid process is investigated and the results demonstrate the feasibility of the hybrid process for the fabrication of ceramic composites. The specimen fabricated by the hybrid sintering process has a clear boundary between the single crystals and the ceramic matrix but almost no clack. The ratio of the ingredients changes more significantly in the specimens fabricated by the hybrid sintering process from their initial ratio than that in the conventionally sintered specimens. The increase of Zr in the single crystal of the ceramic composite sintered by the hybrid process is due to the diffusion of Zr from the ceramic matrix.
No takes yet. Share an insight, caveat, or question.
Takahashi et al. (2003) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: