Answers are grounded in this paper and cite their sources.
The ASTM D5045 standard is one of the most widely-used and cited methods for estimating the fracture toughness of thermoplastic materials. It is well-established in the literature that additively-manufactured thermoplastic materials fail to satisfy the criterion in this standard for plane strain condition, but there is also a common observation that there is no a strong dependence of the sample size on the fracture toughness values. The present study explores this question experimentally, examining three common thermoplastic materials (acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and polycarbonate (PC)) manufactured using the fused filament fabrication (FFF) process. Different specimen sizes were used, none of which met the plane strain criterion specified in the standard. Across several replications and analysis of the experimental data, it was found that there was no statistically significant effect based on sample size. It was concluded that, at least within the size range and materials studied, there is no significant difference in output values based on sample size and that the tests were repeatable across different sample sizes. This suggests that either the samples reached plane strain condition at a smaller size than expected by the standard or that there is not a large difference between plane strain and plane stress conditions for FFF-processed CT samples. This fundamental conclusion was that the ASTM D5045 standard is a valid and useful way to test the linear-elastic fracture properties of FFF-processed thermoplastics.
No takes yet. Share an insight, caveat, or question.
Mira et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: