Answers are grounded in this paper and cite their sources.
This study investigates the over–ageing behaviour of CuBe2 alloy, a precipitation–hardenable copper–beryllium alloy widely used in aerospace and high performance engineering applications. CuBe2 samples were produced via induction melting and forging, followed by solution treatment and ageing at various conditions (345 °C, 420 °C, and 430 °C for 2–8 hours). The mechanical properties, including hardness, tensile strength, ductility, impact toughness, and Young's modulus, were systematically analysed in relation to microstructural evolution and phase transformations. Optical microscopy and XRD analyses confirmed the γ″ → γ′ → γ phase transformation sequence with significant coarsening at higher ageing temperatures and durations. Over-ageing increased impact toughness and fracture energy by 161% and 223%, respectively, but decreased hardness by 39%. Since there is a direct relationship between hardness and wear resistance, the observed hardness reduction most certainly led to 112% decrease in wear performance. Additionally, electrochemical corrosion and hydrogen evolution tests revealed an improvement in corrosion resistance with prolonged ageing, by 166% and 120%, respectively. In this study a broader spectrum of ageing parameters (temperature and time) was explored to determine how optimal ductility and fracture toughness can be achieved while minimising the associated reduction in strength.
No takes yet. Share an insight, caveat, or question.
Karakurt et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: