A multi-layer process for the fabrication of HTSC flux transformers and SQUIDS

A multi-layer technology, based on YBaCuO as the superconducting material and SrTiO 3 as the insulating material, is described. Patterning is performed by photolithography and Ar-ion-beam etching under fiat incidence. Using a resist bake-out prior to the etching, step angles in the patterned lower film of less than 20 degrees are obtained. Superconducting 10-turn thin-film coils have been fabricated with transition temperatures of up to 83 K and critical current densities at 77 K of 2*10 5 A cm -2 . Furthermore we have fabricated a thin-film flux transformer and combined it in flip-chip configuration with a low-noise YBCO step-edge DC SQUID. We measured a magnetic field resolution of the complete magnetometer of 200 fT Hz -1/2 at 1 Hz, dominated by the SQUID noise itself.