Answers are grounded in this paper and cite their sources.
Utilization of natural asphalt in Indonesia has not been fully implemented. Asphalt can be obtained through extraction of asbuton rock using acid solution. Acid solution will dissolve the carbonate solids in asbuton to obtain asphalt. Weak acid solution can be used because it is economical and not too corrosive, such as formic acid, acetic acid, and carbonic acid. Forformic acid and acetic acid, batch extraction with agitation was performed at various temperature (25-95℃), acid concentration (1-10 M), and time. For carbonic acid, CO2 was injected into saline solution continuously and then ultrasound-assisted extraction was performed in batch system. Variations in the concentration of NaCl (0-0.5 M) and temperature (25-110℃) was performed in this solution. Amount of dissolved solids was influenced by all these variables. FTIR analysis and specific gravity testing indicated the presence of carbonate solids in asbuton rock and asphalt product. Formic acid and acetic acid is able to dissolve more solids than carbonic acid because carbonic acid is weaker than the others. However, the use of carbonic acid is more beneficial because CO2 can be regenerated from solution and then it can be used again in the next process. Asphalt from this process can be used to mix asphalt.
No takes yet. Share an insight, caveat, or question.
Devianto et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: