Answers are grounded in this paper and cite their sources.
Background: The purpose of this study was to compare the fracture resistance of inlay restorations manufactured by CAD/CAM using different materials after accelerated artificial aging.Methods: Class I inlay preparations were made for 40 mandibular molar teeth. The teeth were allocated into four groups (n=10) according to the type of manufacturing material used: feldspathic-ceramic (CEREC blocks); leucite-based glass-ceramic (IPS Empress CAD); resin nano-ceramic (Lava Ultimate); and a control (intact teeth). After obtaining digital impressions, restorations were designed and milled with CAD/CAM. Inlay restorations were cemented to the inlay cavities using a dual-polymerizing resin cement (Rely X Ultimate) and stored in distilled water at 37°C for a week. All the samples were then exposed to accelerated ultraviolet aging for 300 hours. Finally, a compressive load was applied to the samples until fracture. Statistical analysis was conducted using One-Way ANOVA and the Tukey HSD test (a=0.05).Results: The mean fracture strength values of the groups were; Control (1555.3±412.2 N)> Lava Ultimate (1525±394N)>IPS Empress CAD (1364.3±545.6N) > CEREC(1231.9±412.2N), respectively. However, there was no statistically significant difference in mean fracture strength among different inlay restoration groups (P>0.05). Fifty percent of the both CEREC and IPS Empress CAD groups and 60% of the Lava Ultimate group showed reparable fractures. Conclusion: The type of material used did not influence the fracture strength of inlay-restored molar teeth and inlay restorations did not weaken the strength of the restored teeth. Therefore, all of the tested materials are suitable for use in the posterior region.
No takes yet. Share an insight, caveat, or question.
Savaş et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: