Answers are grounded in this paper and cite their sources.
In this work the production of Bi-Pb-Sr-Ca-Cu-O powder precursors by three different chemical route techniques, namely freeze-drying, spray-drying and thermal co-decomposition methods, plus the two-powder oxide route method, were investigated experimentally. The most reactive precursor made by the chemical route was made by the freeze-drying method. The reactivity of the powders was related to the particle size and stoichiometric changes during heat treatment. Sintering for 60 h at was sufficient to form nearly pure single-phase (91%) Bi-2223 when the freeze-drying method was employed, whereas the maximum amount of Bi-2223 phase produced by the thermal co-decomposition method was 77% for 83 h sintering at in air, and the maximum amount of Bi-2223 phase produced by spray drying was 55% for 150 h sintering at in air. The two-powder oxide route was found to be intermediate in efficiency among the other techniques used here, i.e. it is worse than freeze drying and thermal co-decomposition but better than spray drying.
No takes yet. Share an insight, caveat, or question.
Yavuz et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: