This is the authors' abstract. We don't add key points for this paper.
Ultra-high-performance engineered cementitious composites (UHP-ECC) are well-known for their outstanding mechanical properties under static and dynamic loads. However, the effect of modifying UHP-ECC with crumb rubber (CR) on its performance, especially under high strain rates , remains poorly understood. This study systematically examined the dynamic compressive behavior and characteristic failure patterns of CR-modified UHP-ECC under high strain rates using a split Hopkinson pressure bar (SHPB) system. The study focused on evaluating the dynamic compressive strength , stress-strain response, and strain energy density (SED). A dynamic increase factor (DIF) formula was developed based on experimental data, and a nonlinear viscoelastic constitutive model was proposed to predict compressive behavior across various strain rates . Results indicate that while the addition of 10 % CR slightly reduces the quasi-static compressive and flexural strength , it significantly enhances tensile ductility. Under high strain rates , CR-modified UHP-ECC shows no substantial effect on peak compressive stress but a marked increase in peak compressive strain . The SED also increased by 20.2 %, outperforming other high-performance materials such as UHPC and normal ECC. These findings demonstrate that incorporating 10 % CR into UHP-ECC offers considerable advantages, particularly in enhancing structural resilience under dynamic loading conditions . The proposed nonlinear viscoelastic model accurately predicts the compressive behavior of CR-modified UHP-ECC, presenting significant implications for practical engineering applications where high strain rate performance is crucial.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ye et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: