This is the authors' abstract. We don't add key points for this paper.
With the increasing adoption of flexible oilfield operations, inlet liquid-flow rate step changes intensify gas–liquid flow-regime transitions and inlet-pressure overshoots. Existing mechanistic models, primarily validated under steady conditions, often fail to reproduce the dynamic timing of pressure peaks under strong boundary disturbances. To address this, a pressure-based transient framework was developed based on a one-dimensional two-fluid model. Pressure–velocity coupling was achieved via a Semi-Implicit Method for Pressure-Linked Equations-like algorithm, incorporating closure relations for stratified and slug flows to capture the non-equilibrium evolution of the flow. Step-change experiments (0.1–1.0 Sm3 h−1) were conducted at 30–60 °C and 85%–95% water cuts. Comparisons with Oil and Gas Simulator confirmed that while the model captures the overall transition trend (quasi-steady mean absolute percentage error <2.3%), it prematurely predicts the pressure peak with transient-stage errors up to 19.3%. Outlet liquid-holdup analyses reveal that this temporal discrepancy is physically rooted in the inertial lag of slug reconstruction, which the quasi-steady closure relations fail to encapsulate. Consequently, a physics-informed residual-correction method was proposed, utilizing weighted quadratic ridge regression to compensate for the missing unsteady interfacial mechanisms. After correction, the peak error was reduced to below 5.72%. This framework offers a reliable physics-data fusion tool for predicting transient responses of liquid flow step changes in horizontal pipelines under operational switching within the study scope.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Shao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: