Answers are grounded in this paper and cite their sources.
The downwash airflow generated by multi-rotor plant protection UAVs during forward flight critically influences droplet deposition and drift control. While most previous studies have focused on hovering conditions or a single canopy stage, comprehensive forward-flight analyses across multiple phenological stages remain scarce. To bridge this gap, this study integrates transient multi-stage CFD simulations with field measurements to quantitatively characterize stage-specific downwash dynamics. A CFD model based on the RANS equations coupled with the SST k-ω turbulence model was established to simulate three-dimensional airflow at a height of 3.5 m above fruit canopies and flight speeds ranging from 1–3 m s⁻¹. Field validation using hot-wire anemometry confirmed strong agreement between simulations and measurements (average relative error = 12.3%, maximum < 20%). Results showed that at 1.5 m s⁻¹, the downwash penetration depth increased by 40% compared with 1.0 m s⁻¹, reaching 0.8 m in the half-leaf stage, and maximum vertical velocity reached 9.2 m s⁻¹. Distinct stage-dependent flow regimes were identified: sparse and uneven airflow at sprouting, deep and symmetric penetration at half-leaf, and uniform but weakened flow at full-leaf. These insights provide a scientific basis for optimizing UAV flight parameters—including flight speed, altitude, and swath width—to achieve more uniform spray coverage, reduced drift, and improved chemical utilization in precision orchard management.
No takes yet. Share an insight, caveat, or question.
Guo et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: