Answers are grounded in this paper and cite their sources.
A compressed gas capacitor now in use at the National Bureau of Standards (NBS) changes capacitance by less than 2 parts per million from 0-300 kV. This extremely small variation results primarily from rugged construction, and thus requires only reasonably careful centering of its three cylindrical electrodes. It has a hollow cantilevered high-voltage electrode suspended between an outer 100-pF low-voltage electrode and a segmented inner low-voltage electrode having values of 1, 2, 4, 8, and 10 pF, or any parallel combination thereof. The capacitor's small voltage dependence was inferred from the following independent measurements: 1) comparison with another high-voltage capacitor having a small experimentally determined coefficient; 2) comparison of the inner and outer sections with each other; and 3) measurement of capacitance change resulting from application of known forces on the cantilevered electrodes, and correlating this with calculated high-voltage electrostatic forces. The capacitor is used in determining the voltage coefficients of NBS-owned commercial standard capacitors; in the calibration of customers' standard capacitors, voltage transformers, and dividers to 200 kV and above; and in research on coupling capacitor voltage transformers and other high-voltage devices and materials.
No takes yet. Share an insight, caveat, or question.
Hillhouse et al. (1973) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: