Answers are grounded in this paper and cite their sources.
316 L stainless steel is being widely used in orthopaedic implants, dental implant and cardiovascular stents in biomedical and engineering applications. In the recent years many attempts have been made to improve the surface properties of metals and alloys used in bio medical applications. Wire EDM is one of the most extensively used non conventional material removal process as it provides an effective solution for machining of hard materials with complex shapes. The optimal combination of selecting the wire EDM parameters is a difficult task as it is affected by large number of input parameters. This paper presents an investigation on the effect of surface roughness of the most influencing wire EDM parameters pulse on time, peak current, servo voltage and wire tension on 316 L SS material. The machining was performed as per design of experiments approach using L16 orthogonal array. Signal to noise ratio is used to find the optimal combination of parameters. The assumptions of Analysis of variance were verified and are found to be valid and then from the ANOVA table the significant parameters are identified and also by using the regression analysis by using Minitab software the mathematical relation for best surface roughness is obtained.
No takes yet. Share an insight, caveat, or question.
Sarcar et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: