Answers are grounded in this paper and cite their sources.
A high residual voltage of polarity opposite to that of the applied voltage was observed in a low-density polyethylene film inserted between plane polished brass electrodes, though the polarity in a specimen with evaporated metal electrodes was the same and the value was lower. As an example, the residual voltage with brass electrodes grew to 100 V even after the circuit was shorted for 1 hour after application of 6 kV for 1 minute. A computer analysis required the following assumption of charge distributions to explain the observed opposite-polarity residual voltage. The injected negative and positive mobile charges, of dispersive mobility, decrease with the distance from source to sink, and a large amount of homo-frozen charges are concentrated in the regions near the electrodes. These charge distributions are related to the existence of thin air layers between the specimen and the brass electrodes.
No takes yet. Share an insight, caveat, or question.
Kitani et al. (1985) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: