This is the authors' abstract. We don't add key points for this paper.
Designing a reliable sensor for indoor formaldehyde (HCHO) with high sensitivity and selectivity is crucial for environmental and health protection. This study reported HCHO sensors based on a nanoporous mixed-phase In 2 O 3 nanoparticle. A combined cubic and orthorhombic phase In(OH) 3 /InOOH [c-In(OH) 3 /o-InOOH] precursor, synthesized through a facile solvothermal route at different temperatures, was annealed to prepare the In 2 O 3 nanoparticle homojunction. The obtained In 2 O 3, calcined at 350 °C, exhibited a porous structure and a large specific surface area of 81.46 cm 3 ·g –1, facilitating more number of active sites’ exposure for HCHO-sensing reactions. Results showed that the In 2 O 3 calcined at 350 °C exhibited the best HCHO-sensing performances at 120 °C with a large response value (330–50 ppm), good selectivity, and a short response time (12 s). Additionally, its detection limit could reach 11 ppb. This HCHO gas sensing behavior was owing to the mixed-phase homojunction structure formed between cubic and rhombohedral In 2 O 3, the large specific surface area, and the porous structure with abundant oxygen vacancies. This study indicated that the nanoporous mixed-phase In 2 O 3 nanoparticles could be the potential candidates for rapidly detecting HCHO at low concentration levels under low power consumption.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Qin et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: