This is the authors' abstract. We don't add key points for this paper.
Purpose To optimize scoliosis correction strategies by comparing continuous and interval pedicle screw configurations and proposing a dual-geometry screw design.Methods A patient-specific T11-L5 scoliotic spine model was reconstructed via finite element analysis (FEA). Continuous and interval screw placements were evaluated for biomechanical performance. A novel dual-geometry screw (tapered-cylindrical transition) was developed.Results Continuous configurations achieved a 43.5% reduction in displacement (1.33 mm vs. 2.36 mm) and a 29.7% decrease in screw stress (444.08 MPa vs. 631.35 MPa). The dual-geometry screw lowered drilling stress (16.5%, p < 0.05) and displacement heterogeneity (22.4%).Conclusion Continuous screws enhance stability through synergistic load transfer, while dual-geometry screws mitigate interfacial damage. This provides biomechanical criteria for clinical scoliosis correction.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
He et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: