Answers are grounded in this paper and cite their sources.
This study investigates the mechanical properties and the wear behavior of Al 7075/Al2O3/SiCNP composites. The hybrid composites are manufactured using the stir casting technique. In this work, the Al 7075 alloy is reinforced with five different weight fractions of Al2O3 and a constant SiCNp, with an average particle size of 50 nm. The aluminum metal matrix composites are examined through surface morphology and X-ray diffraction (XRD) patterns to identify the material behavior. The material characteristics and the wear behavior of the metal composites are examined using a pin-on-disk test. Wear measurements are performed by varying loads, sliding speeds, and sliding distances. The results reveal that the composites reinforced with 4% of Al2O3 particulates exhibit superior properties. The wear rate and the coefficient of friction (COF) decrease with the increase in the reinforcement content.
No takes yet. Share an insight, caveat, or question.
Suresh et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: