Answers are grounded in this paper and cite their sources.
The facilitation of access to rapid and low-cost microfabrication methods is essential for improving the development cycles of testing new chip designs and research ideas.A simple fabrication method of biocompatible microchannels with a height of 0.3 mm is significant for biological scientists to study animal and plant cells (∼0.1 mm).Microfabrication using a cutting plotter and a knife blade provides a rapid and low-cost technology.In a previous study, designed cut pieces were used as a channel mold, but they were easy to deform during handling, and therefore the large-scale production of channels was difficult.Moreover, it is required to characterize the cutting process of 0.3-mm-thick sheets with a low-cost plotter.Here, we report the development of an easy fabrication method of 0.3-mm-high polydimethylsiloxane (PDMS) microchannels based on a desktop cutting plotter (300 USD) and an engraved sheet as follows.1) A 0.3-mm thick sheet of cast-coated paper or silicone rubber was used as a mold material and patterns were created with a cutting plotter.2) It was pasted to a double-sided tape to make a master mold of a flow channel.3) The mold was replicated in PDMS to make a negative mold.4) This PDMS mold was again transferred to a final PDMS chip.5) It was bonded to a glass substrate to form a PDMS flow channel.We characterized the pattern transition of rectangular shapes from an engraved sheet mold to a final PDMS channel, that is essential for the design of a channel using this method.Iand Y-shaped microchannels (height: 0.3 mm) were fabricated and fluorescent particles and 0.2-mm diameter Volvox were introduced into the channels to show their performances.
No takes yet. Share an insight, caveat, or question.
Nagai et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: