Answers are grounded in this paper and cite their sources.
Experimental study demonstrates ultra-narrowband optical filtering with sub-nanometer bandwidth control, highlighting viable fabrication pathways for quantum technology and single-photon LiDAR.
The rapid development of quantum technology and single-photon LiDAR places ever-increasing demands on detection systems in terms of bandwidth suppression, wavelength stability, and transmission accuracy. Conventional narrowband filters, however, are falling short in sub-nanometer bandwidth control and high-temperature stability, thereby failing to support high-precision measurements. Consequently, ultra-narrowband optical filters have emerged as a key approach to overcoming these performance bottlenecks. This paper focuses on the core technologies involved in the development of such filters. In the design phase, multiparameter optimization based on a Fabry–Perot (F-P) etalon translates application requirements into fabrication parameters. For substrate fabrication, a sequential process of computer numerical control (CNC) milling, lapping, chemical–mechanical polishing (CMP), and ion-beam polishing, followed by atomic layer deposition (ALD) step formation and ion-beam evaporation coating, is employed to achieve a nanometer-level surface figure and roughness. Temperature control is achieved via a dual-tank hybrid circulation system, maintaining stability within ±0.1 °C. Test results show that the fabricated filter exhibits a full width at a half maximum (FWHM) of 30–60 pm, a free spectral range (FSR) of 260 ± 5 pm, a temperature stability of ≤3 pm/°C, and a peak transmittance of ≥80%. These results preliminarily confirm the device’s excellent overall performance.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: