Answers are grounded in this paper and cite their sources.
Experimental study demonstrates effective vanadate corrosion mitigation by calcium-based coatings in high-temperature environments, indicating an alternative to fuel additives.
Vanadate corrosion occurs in devices powered by heavy fuel oil, such as stationary turbines. To avoid this aggressive attack from molten V 2 O 5 , inhibitors like fuel‐dissolvable Ca‐species are usually added beforehand to the fuel to bind V 2 O 5 as higher‐melting vanadates during combustion. However, this requires a constant addition of inhibitors and increased maintenance due to the accumulation of slag on the turbines, resulting in higher costs. As an alternative strategy, here the inhibitor is directly incorporated into a protective coating to be applied and available exactly where it is necessary. In this study, three Ca‐based coatings were investigated for their potential to mitigate vanadate corrosion at 600°C and 700°C. The various coatings showed promising protective properties for up to ~500 h, demonstrating suppression of the salt fluxing mechanism by the formation of higher melting vanadates, especially CaV 2 O 6 . Additionally, during the sintering of the coatings, a Ca‐Si‐Ni intermetallic phase formed, that was identified as a potentially highly protective phase against molten V 2 O 5 .
No takes yet. Share an insight, caveat, or question.
Ulherr et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: