Answers are grounded in this paper and cite their sources.
Multiphysics study demonstrates an optimal inner-to-outer diameter ratio of 0.15 to 0.50 in field shapers, indicating critical geometric constraints for electromagnetic tube compression.
Field shapers concentrate electromagnetic forces on tubes during electromagnetic pulse tube forming and strongly influence deformation capability. This study investigates how the field shaper’s inner-to-outer diameter ratio limits tube compression. A Kirchhoff-law-based analytical model was combined with coupled electromagnetic-mechanical simulations and experiments. The model predicts that increasing the inner diameter reduces both inner-surface current and magnetic pressure. Meanwhile, the hoop-stress indicator first increases and then decreases because the tube radius and pressure exert competing effects. Under the investigated geometry and operating conditions, the favorable inner-to-outer diameter ratio ranges from 0.15 to 0.50. Under these conditions, current-path interference begins near 0.7 and becomes severe above 0.8, rapidly reducing inner-surface current. Experiments using 70 and 80 mm tubes validated the coupled simulation within the investigated range and supported the predicted trend. These findings guide design and indicate that larger tubes require greater field-shaper outer diameters, larger coils, and higher discharge energy.
No takes yet. Share an insight, caveat, or question.
池 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: