Answers are grounded in this paper and cite their sources.
This paper explores the potential of Longan peel waste (LPw) as a sustainable and cost-effective matrix for selenium-based cathodes in Li-Se and Na-Se batteries . Following activation, we created LP 2 —a designation for the carbon precursor derived from LPw, activated at a 1:2 ratio of carbonized LPw to KOH. This nomenclature, where ‘LP' stands for ‘Longan peel' and ‘2′ reflects the optimization of this ratio, led to a hierarchical porous structure with an average pore size of 3.0307 nm and a significant BET surface area of 111.9386 m 2 g -1 . Selenium was incorporated into the LP 2 matrix using a simple melt diffusion technique, yielding the composite Se@LP 2 . In Li-Se batteries, Se@LP 2 exhibited an initial discharge capacity of 1033.75 mAh g⁻ 1 at 0.1C. At a 1C rate, the composite demonstrated a capacity retention of 301.14 mAh g⁻ 1 after 550 cycles and 380.91 mAh g⁻ 1 after 100 cycles. Moreover, for Na-Se batteries, the composite showcased a capacity retention of 347.18 mAh g⁻ 1 after 100 cycles at 0.1C. These findings underscore LP 2 's potential as a viable and efficient matrix for selenium-based cathodes, revealing promising prospects for the advancement of highly efficient Li-Se and Na-Se batteries.
No takes yet. Share an insight, caveat, or question.
Khan et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: