Answers are grounded in this paper and cite their sources.
water contact angle (WCA) measurements. Furthermore, the effect of the type of resin on the properties of the coating was investigated. The surface morphology of the blended water-based polyacrylic acid (PAA) resin was uniform and flat and its adhesion to the substrate was the highest (4.21 MPa). Considering the durability and optical properties of the coating, the optimal blend was 3 wt% PAA resin, which exhibited a transmittance of 90%. When the content of TEOS, which enhanced the crosslinking in the coating, was increased to 2 wt%, the results showed that the SHPL coating maintained good anti-friction, boiling resistance, and anti-fogging properties under the conditions of 300 cycle Taber friction with 250 g load and soaking in hot water at 100 °C for 1 h. In particular, the excellent durability of strong acid and alkali resistance, heat resistance, and long-term aging resistance will facilitate the commercial viability and expand the application of SHPL coating in various research fields.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: