Answers are grounded in this paper and cite their sources.
Poly(vinylidene fluoride) (PVDF) is a semicrystalline polymer that exists in four crystalline phases (α, β, γ, δ). Among these, the β-phase has received tremendous techno-commercial importance due to its higher dipole moment as compared to the other phases, and thus many strategies have been explored in the recent past to obtain the β-polymorph of PVDF. In this study, the effect of shear history on crystalline morphology and behavior of PVDF has been investigated systematically by polarized optical microscopy coupled to a hot stage, Fourier transform infrared spectroscopy, differential thermal analysis, rheometry, and dielectric relaxation spectroscopy. Thin films of PVDF (120–150 μm) were sheared at different temperatures ranging from 155 to 220 °C and were allowed to isothermally crystallize at 155 °C. When the samples were isothermally crystallized at 155 °C, a remarkable increase in β-phase content was observed. More interestingly, this phenomenon was observed to be shear history dependent. For instance, the samples which were sheared at high temperature (220 °C) reflected in higher β fraction as compared to samples which were sheared at lower temperature (155 °C). It is envisaged that the distance between T shear (temperature at which the samples were sheared) and T cry (crystallization temperature) significantly influences the content of the β-phase in PVDF. This study clearly demonstrates the fact that both shear history and the depth from T c influence the conformational changes in PVDF.
No takes yet. Share an insight, caveat, or question.
Gebrekrstos et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: